Create a new WIFI key for your Canon printer. When we try to print using our printer that is connected to our local network, it can occasionally cause a difficulty, and the printing will eventually fail to fix this visit: https //ij.start.canon configurar. This is usually because the printer has been unplugged from the network to which it was previously connected and set.
In other circumstances, we may just want to connect our printer to a different network, have changed the password on our Wi-Fi Router, or have changed the name or SSID of it (Router). As a result, in this short guide, we’ll go through how to set up a Canon printer on your network.
Create a new WIFI key for your Canon printer.
Before we get started ij start canon configurar, the IJ Network Tool is one of Canon’s software solutions. A program that allows us to manage our printer’s wireless connection and associated network characteristics. That software will be used on a Windows computer.
STEP 1: ABRIR THE CANON IJ NETWORK TOOL PROGRAM
The program will begin looking for the Canon printers that are linked to our PC via wire as soon as it is launched. It’s the first thing you see when the program starts up.
STEP 2: SEARCH FOR PRINTERS
We can see the printers that the application has recognized in this stage. It has located the printer that we want to set up. We now select the printer and go to “Settings.”
If the printer is not detected in your situation, try stopping the software and restarting it to have it scan the printers again. If it still doesn’t work, make sure the printer is linked to your computer properly.
STEP 3: FIND A WIFI NETWORK TO CONNECT
At this point we simply have to click on “Search” so that the program scans the WIFI networks.
STEP 4: SELECT A WIFI NETWORK IN
After the networks have been inspected, we must choose which network to connect to. To connect, we must first provide authentication settings (password or key), which we can do by clicking “Configure.”
STEP 5: AUTHENTICATION OF THE NETWORK
After we’ve selected the Network, we’ll be prompted to input the login settings. It’s just the key or password in this example, followed by the type of network encryption. The encryption is usually detected by the software itself.
We only need to pick “Change configuration” because the program has already detected the kind of authentication.
- Because we are modifying those parameters, it will ask us to check the kind of authentication once more (previous step). It has, however, been identified here. The Network password is requested once you click “Next” in that phase. This is where we enter our Network’s password.
- The password for our network must be added in the next phase of the setting. We then pick “Next.”
- We are requested to register the data that we have added in the final step of the setting. We choose “Finish.” That concludes the configuration of the Network’s authentication component.
STEP 6: ADMINISTRATOR PASSWORD
To verify all of the information, most printers, including the Canon printer in this situation, ask for an administrator password. The SERIAL NUMBER on the side of the printer body is commonly used as the password.
Because the administrator password might be anything from SERIAL NUMBER to ADMIN to Canon, you can test some of those combinations. We’ve included a link to an article where you may learn more about this portion of the administrator password.